Xp wpa2 validating identity

You just have to find the common setting between the two devices.

When setting up WPA you will see the option for either a radius server (Enterprise, and you see this in the corporate environment) or a place to enter a passphrase (Pre Shared Key, PSK).

Abstract This article describes the tools used to troubleshoot a Microsoft Windows XP or Windows Server 2003-based wireless client, a wireless access point (AP), and the Internet Authentication Service (IAS) when using Institute of Electrical and Electronic Engineers (IEEE) 802.1X authentication for IEEE 802.11-based wireless connections.WPA2 is supported as i can connect to WPA2 personal APs. During the connection it flashes that it "connected" for a second then goes to "Validating Identity" which it eventually timesout on.I am using the Windows Wireless Connection Manager. On a couple of occasions I've seen that particular AP (don't know what firmware) suddenly stop attempting to authnenticate clients (it never sends any RADIUS requests) and power-cycling the AP "fixes" the issue.If you are telling me that you are using WPA with a shared key on your router, then you are using WPA - Personal. You want to make sure you are using that option on your computer. You do not want to make sure you are not using WPA-EAP. This version requires a certificate server and a matching certificate on yout computer to connect to the wireless.It looks like you are using WPA-EAP on your computer.In XP SP2, create a profile by clicking on the "Add" button under the "Preferred networks"section.WPA2 is supported if you installed the additional WPA2 patch for Windows XP or running Vista.I cannot get WPA2 enterprise to work on my network. Windows Domain, using IAS and its own CA Linksys WAP200 Access Point I setup the AP to use WPA2-Enterprise Mixed using RADIUS I setup and registered IAS on the domain controller.I added the AP as a client with and have tried using both RADIUS Standard and Cisco as the RADIUS type.This article also describes the most common problems with IAS authentication and authorization, certificate properties, and the process of certificate validation for both wireless client and IAS server certificates.This article assumes background knowledge in IEEE 802.11 wireless LAN and associated security technologies and the components of a Windows-based authentication infrastructure.